Traceability of the Hannover FG5X-220 to the SI units

verfasst von: Manuel Schilling, Ludger Timmen
Abstract: The absolute measurement of g is currently realized through the laser interferometric measurement of a free falling retro-reflector. The Micro-g LaCoste FG5X is a free-fall gravimeter with a laser interferometer in Mach-Zehnder configuration which uses simultaneous time and distance measurements to calculate the absolute value of g. Because the instrument itself contains the necessary working standards for precise time and length measurements, it is considered independent of external references. The timing is kept with a 10 MHz rubidium oscillator with a stability of 5 ×10^-10. The length unit is realized by the laser interferometer. The frequency calibrated and iodine stabilized helium-neon laser has a wavelength of 633 nm and an accuracy of 2.5 ×10^-11. In 2012 the FG5-220 of the Institut für Erdmessung (IfE) was upgraded to the FG5X-220. The upgrade included a new dropping chamber with a longer free fall and new electronics including a new rubidium oscillator. The metrological traceability to measurement units of the Système International d’unités (SI unit) is ensured by two complementary and successive approaches: the comparison of frequencies with standards of higher order and the comparison of the measured g to a reference measured by absolute gravimeters defined as primary standards within the SI. A number of experiments to test the rubidium oscillator were performed. The oscillator showed a linear drift of 0.2 ×10^-3 per month (= 0.3nms^-2 per month) in the first 18 months of use. A jump in the frequency of 0.01 Hz (= 20nms^-2 was revealed recently and the drift rate changed to -0.4 ×10^-3/month. Since the upgrade of the absolute gravimeter the instrument participated in several international comparisons, which showed no significant measuring offset between the instrument prior and after the upgrade.
Organisationseinheit(en): Institut für Erdmessung
Typ: Aufsatz in Konferenzband
Seiten: 69-75
Anzahl der Seiten: 7
Publikationsdatum: 2018
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Computer in den Geowissenschaften, Geophysik
Elektronische Version(en): https://doi.org/10.1007/1345_2016_226 (Zugang: Geschlossen)
: Details im Forschungsportal „Research@Leibniz University“

BibTeX

@inproceedings{770b6c340800473782576001903ac0ec,
title = "Traceability of the Hannover FG5X-220 to the SI units",
abstract = "The absolute measurement of g is currently realized through the laser interferometric measurement of a free falling retro-reflector. The Micro-g LaCoste FG5X is a free-fall gravimeter with a laser interferometer in Mach-Zehnder configuration which uses simultaneous time and distance measurements to calculate the absolute value of g. Because the instrument itself contains the necessary working standards for precise time and length measurements, it is considered independent of external references. The timing is kept with a 10 MHz rubidium oscillator with a stability of 5 ×10-10. The length unit is realized by the laser interferometer. The frequency calibrated and iodine stabilized helium-neon laser has a wavelength of 633 nm and an accuracy of 2.5 ×10-11. In 2012 the FG5-220 of the Institut f{\"u}r Erdmessung (IfE) was upgraded to the FG5X-220. The upgrade included a new dropping chamber with a longer free fall and new electronics including a new rubidium oscillator. The metrological traceability to measurement units of the Syst{\`e}me International d{\textquoteright}unit{\'e}s (SI unit) is ensured by two complementary and successive approaches: the comparison of frequencies with standards of higher order and the comparison of the measured g to a reference measured by absolute gravimeters defined as primary standards within the SI. A number of experiments to test the rubidium oscillator were performed. The oscillator showed a linear drift of 0.2 ×10-3 per month (= 0.3nms-2 per month) in the first 18 months of use. A jump in the frequency of 0.01 Hz (= 20nms-2 was revealed recently and the drift rate changed to -0.4 ×10-3/month. Since the upgrade of the absolute gravimeter the instrument participated in several international comparisons, which showed no significant measuring offset between the instrument prior and after the upgrade.",
keywords = "Absolute gravimetry, Frequency standard, Gravimeter comparison, SI units",
author = "Manuel Schilling and Ludger Timmen",
note = "Funding information: This work was in part funded by Research Foundation (DFG, MU 1141/16-1).; International Symposium on Earth and Environmental Sciences for Future Generations, 2015 ; Conference date: 22-06-2015 Through 02-07-2015",
year = "2018",
doi = "10.1007/1345_2016_226",
language = "English",
isbn = "9783319691695",
series = "International Association of Geodesy Symposia",
publisher = "Springer Verlag",
pages = "69--75",
editor = "Laura Sanchez and Freymueller, {Jeffrey T.}",
booktitle = "International Symposium on Earth and Environmental Sciences for Future Generations - Proceedings of the IAG General Assembly",
address = "Germany",
}